Butterfly Valve

Please read Postage

The Butterfly Valve is a fantastic item that empties your vessel in no time.

This is by far the quickest way to empty a vessel. Fits 2” Ferrule.


If using 54mm copper pipe you will need the 2” tri-clamp fittings. These valves are absolute top quality valves. A first-class item. They will empty your still etc. in no time. I say 2” for the 64mm when you look at the various others they say 64mm. Tri Clove, Tri-Clamp. Anyway, this is for the 2”/64mm tri-clamp ferrule. Again the ferrule can be copper, brass or stainless steel makes no difference.

I cannot believe the price for such a well-engineered item.

Stops

They have various stops to set the valve at. These handles are spring-loaded so that you can set them in the pre-formed hole stops. Pull the handle back twist to position and release. This will allow outflow and inflow at a determined rate. It is put together with a nut and bolt system so it can be easily taken apart for maintenance.

All in all a very nice well-engineered piece of equipment. 2” only I’m afraid. If this item was made in the UK it would cost well over £100 and it would not surpass the quality of this item.

Enough enquiries and I will ask my friend for some prices for larger ones.

64mm 2” Tri-Clamp Butterfly  Valve.  £36.50 + p&p 

All postage is for the UK.   Europe and the Republic of Ireland is International postage and no longer available. However, if items are under 2Kg I can send them with Royal Mail as customs is not such a problem this is still an option for small items.

1" Leaver Ball Valve

1″ Ball Valve

These are an all stainless steel Ball Valve 1″ ( 51mm ) Tri Clamp Fitting. £26.00 each plus P&P. I also have some clamps and gaskets should you require them. Second class shipping for UK mainland only. Other please ask.

 

Parrot Tap, Gin Basket Tap.

Parrot Tap Gin Basket Tap

Small Leaver Valve Tap. These are the same taps as supplied with the Gin Baskets and some of the Parrots.

They are a vey smart well made quarter turn tap complete with male 1/2″ Hose Tail.

All Stainless Steel with 1/2″ Female Thread both ends.

Half Inch Tap with Hose Tail. £15.00

 

Hose Tails

Hose Tails

25mm x 51mm base Hose Barb. This is a 25mm Hose fitting on a 51mm Tri Clamp Base.  £10.00

 

18mm x 51 base Hose Barb. This is an 18mm Hose fitting on a 51mm Tri Clamp Base. £9.75 

 

Needle Valves

Needle Valves

Stainless Steel 304 Compression Needle Valves with solid metal handles. A nice robust valve. Compared to most needle valves they are extremely well priced for the quality.

I have 6mm, 8mm, 10mm & 15mm. These are the most used in distilling for water control but also have other uses.

We all want the best from our stills. The slower the product out the higher the ABV.  Good needle valves help us achieve this. They are a very good control for the water supply to various parts of the still. Having looked around at these items and the stupid prices being asked from some suppliers. I have managed to source some very nice little valves at a sensible price. I can pass this price saving on to my fellow distillers. I make a couple of bob and you save a few bob. Win-Win.

6mm £9.55  + p&p

 

8mm  £11.25    + p&p

 

10mm £12.10   + p&p

 

15mm £20.60   + p&p  

We also have some 12mm push-fit water valves and ‘Y’ push-fit connectors.

12mm Push Water Control Valve £5.38.

 

Push-fit Y connector £0.75

 

Plastic Valves

Plastic Valves

A cheap economy plastic valve. These are an ideal inexpensive way to control the water flow for your still cooling.

8mm and 10mm Plastic Hose Taps.

I have some with barb to barb and some with a 15mm BSP thread on one end and a barb on the other end. See Photos

I have only got the two  sizes . These are the 8mm and the 10mm this is suitable for the water control on the Liebig and the top of the still cooling coil and any other cold water control.

The 10mm  barb is suitable for most 12mm ID garden hoses. I also have some excellent plastic reusable hose clips.

These are plastic on / off valves and can be used on the cold water side of the supply into cooling  for your still. They are not suitable for hot water control. They are not suitable to control your alcohol output.

They can be used in the garden to control the hose pipe when watering plants washing the car etc.

8mm Barb To Barb  £3.00 

8mm Barb to 1/2” BSP Male £3.25  

10mm Barb to Barb £3.00

10mm Barb to 1/2” BSP Male  £3.25

All postage is for the UK mainland.   Europe and the Republic of Ireland is International postage please ask before you purchase.

Solenoid Valves

Solenoid Valves.

I have a selection of Brass body solenoid valves.  They are all 220Volt / 230 Volt AC 2Watt with a Female fitting connection. All the valves look the same so I have only added a couple of photos.

These units are made by Sanye Valve Company

Special offer less 10% off all valves. Price has been reduced to reflect the discount. The prices shown are the reduced prices. These are a steel at these prices. 

Sizes range from
DN10 -3/8”  Was £14.30 now £13.00

 

DN15 -1/2”  Was £16.50 now 15.00

 

DN20 -3/4”  Was £18.70 now £17.00

 

DN25 -1” Was £23.10 now £21.00  

 

DN32 -1\1/4”  Was £41.80 now £38.00

 

I use these units to control the water flow through my Dephlegmator.

Yu Yao SANYE Valve Technology co.ltd. Core Business Electromagnetism Valves, Water,Pneumatic, Steam,Hydraulic etc.

Water Tube Red & Blue

12mm Push Water Fittings.

I only keep the Y Fitting and the Water Regulator Fitting along with the Elbow and a few Straight Fitting. If it is not listed I do not have it.

12mm Y Fitting £0.85 each.

 

12mm Water Regulator £5.38 each.

 

Water Tube.

Red and Blue Tubing. Same price for Red and Blue. This is used for attaching to the Dephlegmator’s,  Shotgun Condensers and anything else that needs a good water supply.

This is sold in lengths of  1 Meter or multiples of £3.78.

There are also 1/2” BSP x 16mm Push fittings available this includes straight or elbow.

Red Tube

1mt Red Tubing £3.78

 

2 mts Red Tubing £7.56

 

3 mts Red Tubing £11.06

 

4 mts Red Tubing £14.52

 

5 mts Red Tubing £17.96

 

6 mts Red Tubing £21.32

 

Blue Tube

1 mt Blue Tubing

 

2mts Blue Tubing

 

3 mts Blue Tubing

 

4mts Blue Tubing

 

5 mts Blue Tubing

 

6 mts Blue Tubing

 

12mm Red and Blue Water Tube £3.40 per mt.

1mt Red

 

2mts Red

 

3mts Red

 

4mts Red

 

5mts Red

 

6mts Red

 

1mt Blue

 

2mts Blue

 

3mts Blue

 

4mts Blue

 

5mts Blue

 

6mts Blue

 

 I also have these in the elbow shape. 

They are in 16mm and 12mm tube sizes and 15mm BSP Male thread. Please also be aware these could be sold out due to the demand at this time.

All postage is for the UK.   Europe and the Republic of Ireland is International postage please ask before you purchase.

Push Fit Elbows same thread as the straight push. 15mm BSP.

1 x 16mm Push Elbow £3.65

 

2 x 16mm Push Elbow 6.95

 

3 x 16mm Push Elbow 10.42

 

4 x 16mm Push Elbow £14.52

 

5 x 16mm Push Elbow £16.35

6 x 16mm Push Elbows £19.60

 

 

12mm Push Elbow 15mm male BSP Thread.  £3.20.

1 12mm Elbow

 

2  12mm Elbow

 

3 12mm Elbow

 

4  12mm Elbow

 

5 12mm Elbow

 

6 12mm Elbow

 

All postage is for the UK.   Europe and the Republic of Ireland is International postage and no longer available. However, if items are under 2Kg I can send them with Royal Mail as customs is not such a problem this is still an option for small items.